Transistor Tester TFT Diode Triode Capacitance Meter LCR-TC1 ESR NPN PNP MOSFET

Feature:
1: Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically,
finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight).
2: Measurement results represent by TFT graphic display(160x128). Support Chinese and English.
3: After detection, align the infrared remote control with the "IR" light, then press the button in the remote control,
if the detector successfully decode it, it will display the data code and infrared wave form.
4: One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector.
5: For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc.

Specifics:
Condition: 100% Brand New
Display: 1.8 inch TFT Screen, Color Screen
Diode Range: less than 4.5V
Zener Diode: Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT less than 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Power Voltage: 3.7V
Power: Built-in Rechargeable Lithium Battery

Note:
1.Before measuring the capacitor, discharge it, otherwise it may burn out. Online or live test is not recommended.
2.The output current of the tester is 6MA/voltage <5V. High-power IGBTs, thyristors, and Darlington tubes that require higher current/higher voltage drive may not be measured.
Air core coils and power inductors cannot directly measure the inductance. It is recommended to try series connection.
Appropriate color ring inductance test, capacitors below 20, it is recommended to test a capacitor of 20, these are empirical suggestions, and the specifics shall prevail.
3.Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source!
4.Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!
5.Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on!
6.Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!

Package Included:
1 X Multi-functional TFT Transistor Tester
1 X Electronic Component Set
3 X Pieces Test Hook
1 X Piece CableShipping
1. Free Shipping
2. Location: Leicestershire
3. Shipping time: 3-8 buisness days via Royal Mail or FedEx.

Warranty:
Guarantee Period: 1 Years
Returns & Refunds: Customers can return the goods within 60 days of receipt and process quick refund within one day
24-Hour Support: Provide you with timely after-sale support